Cisco 1000 (1000/8/4) with CSu/DSU:

This is a Cisco 1000 with an AdTran DSU III AR CSU/DSU (and the connector cable). It has 1 RJ45 console port, 1 RJ 45 ethernet port, 1 v.35 serial port and 1 flash card slot. We will install a different IOS image and/or ship the unit for an additional installation/handling fee. All of this router's hardware has been tested and is fully functional.

The router's current hardware/software configuration is:

System Bootstrap, Version 5.3.2(7) [vatran 7], RELEASE SOFTWARE (fc1)
Copyright (c) 1994 by cisco Systems, Inc.
C1000 processor with 8192 Kbytes of main memory

Cisco Internetwork Operating System Software
IOS (tm) 1000 Software (C1005-BY-M), Version 11.0(9), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Tue 11-Jun-96 01:15 by loreilly
Image text-base: 0x02004000, data-base: 0x02230964

cisco 1000 (68360) processor (revision @) with 7680K/512K bytes of memory.
Processor board ID 02033157
Bridging software.
1 Ethernet/IEEE 802.3 interface.
1 Serial network interface.
8K bytes of non-volatile configuration memory.
4096K bytes of processor board PCMCIA flash (Read/Write)
								

Click on the thumbnails below to see full sized photos:

Top		Bottom
Front		Back

Cisco 1720 (1720/24/8):

This is a Cisco 1720. It has 1 RJ45 console port, 1 RJ45 aux port 1 RJ 45 ethernet port. It has 2 WIC slots. We will install a different IOS image and/or ship the unit for an additional installation/handling fee. All of this router's hardware has been tested and is fully functional.

The router's current hardware/software configuration is:

System Bootstrap, Version 12.0(19980715:232216) [sdey-12_0_t-v5-rommon-release 1
01], DEVELOPMENT SOFTWARE
Copyright (c) 1994-1998 by cisco Systems, Inc.
C1700 platform with 24576 Kbytes of main memory

Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-BNR2SY-M), Version 12.0(5)XQ, EARLY DEPLOYMENT RE
LEASE SOFTWARE (fc1)
TAC:Home:SW:IOS:Specials for info
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 09-Aug-99 13:47 by rnapier
Image text-base: 0x80008088, data-base: 0x80943D6C

cisco 1720 (MPC860) processor (revision 0x00) with 22119K/2457K bytes of memory.
Processor board ID 0000 (1314672220), with hardware revision 0000
M860 processor: part number 0, mask 32
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
								

Click on the thumbnails below to see full sized photos:

Top		Bottom
Front		Back

Cisco 2501 (2501/16/8):

This is a Cisco 2501 router with no rackmount kit. It has 1 RJ45 console port, 1 RJ45 aux port, 1 AUI ethernet port and 2 v.35 serial ports. It has no expansion slots. We're asking for $300. We will install a different IOS image and/or ship the unit for an additional installation/handling fee. All of this router's hardware has been tested and is fully functional.

The router's current hardware/software configuration is:

System Bootstrap, Version 5.2(5), RELEASE SOFTWARE
Copyright (c) 1986-1994 by cisco Systems
2500 processor with 16384 Kbytes of main memory

Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IS-L), Version 11.2(15), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1998 by cisco Systems, Inc.
Compiled Tue 07-Jul-98 21:56 by tmullins
Image text-base: 0x0302F154, data-base: 0x00001000

cisco 2500 (68030) processor (revision D) with 16384K/2048K bytes of memory.
Processor board ID 01526578, with hardware revision 00000000
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
								

Click on the thumbnails below to see full sized photos:

Top		Bottom
Front		Back

Cisco 2524 (2524/8/8):

This is a Cisco 2524 which is missing one of its WIC slot covers and has no rackmount kit. It has 1 RJ45 console port, 1 RJ45 aux port and 1 RJ45/AUI ethernet port. It has 2 serial WIC slots and 1 BRI WIC slot. This unit still has its original box (though the cardboard is naturally kinda tatty at this point) and its original documentation. We will install a different IOS image and/or ship the unit for an additional installation/handling fee. All of this router's hardware has been tested and is fully functional.

The router's current hardware/software configuration is:

System Bootstrap, Version 11.0(5), SOFTWARE
Copyright (c) 1986-1994 by cisco Systems
2500 processor with 8192 Kbytes of main memory

Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-J-L), Version 11.0(5), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Mon 05-Feb-96 22:32 by hochan
Image text-base: 0x03032D1C, data-base: 0x00001000

cisco 2524 (68030) processor (revision B) with 8188K/2048K bytes of memory.
Processor board ID 02797548, with hardware revision 00000000
Bridging software.
SuperLAT software copyright 1990 by Meridian Technology Corp).
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
TN3270 Emulation software (copyright 1994 by TGV Inc).
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
No module installed for Serial Interface 0
No module installed for Serial Interface 1
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
								

Click on the thumbnails below to see full sized photos:

Top		Bottom
Front		Back
Boxed

Cisco 4500 (4500/32/12):

This is a Cisco 4500 with a rackmount kit (the big steel paddles sticking out the back in the photograph are to stabilize its weight in a rack; it's pretty heavy). It has 1 25-pin serial console port, 1 25-pin serial aux port. It contains 3 NP modules: 1 NP-4T, 1 NP-1F-D FDDI and 1 NP-1F-S FDDI . These give it 4 serial interface ports and 2 FDDI network ports. We're asking for $400. We will install a different IOS image and/or ship the unit for an additional installation/handling fee. All of this router's hardware has been tested and is fully functional.

The router's current hardware/software configuration is:

System Bootstrap, Version 5.1(1) [daveu 1], RELEASE SOFTWARE (fc1)
Copyright (c) 1994 by cisco Systems, Inc.
C4500 processor with 32768 Kbytes of main memory

Cisco Internetwork Operating System Software
IOS (tm) 4500 Software (C4500-I-M), Version 11.1(24), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 04-Jan-99 19:28 by richv
Image text-base: 0x600088A0, data-base: 0x60450000

cisco 4500 (R4K) processor (revision 0x00) with 32768K/16384K bytes of memory.
Processor board ID 01196815
R4600 processor, Implementation 32, Revision 1.0
G.703/E1 software, Version 1.0.
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
4 Serial network interfaces.
2 FDDI network interfaces.
128K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
4096K bytes of processor board Boot flash (Read/Write)
								

Click on the thumbnails below to see full sized photos:

Top		Bottom
Front		Back